In preparation / under review

  • Cerminara, A., Hermann, T., Ifti, H., McGilvray, M., Deiterding, R., Sandham, N. “Inuence of instability modes on cooling performance in hypersonic boundary layer with slot injection”, Aerospace Science and Technology (under review, 2019).
  • Elmukashfi, E., Murray, A.V., Ireland, P.T. and Cocks, A.C.F., “Analysis of the Thermomechanical Stresses in Double-Wall Effusion Cooled Systems”, ASME Journal of Turbomachinery, 2019 (Under review)
  • Giovannini, T., Hedgecock, R. and Vandeperre, L.J. “Gelcasting of samples with designed porosity”. In preparation for Journal of the American Ceramic Society.
  • Hermann, T., McGilvray, M., Naved, I. “Performance of Transpiration Cooled Heat Shields for Re-entry Vehicles”, AIAA Journal (responded to review, 2019).
  • Hermann, T., Naved, I. and McGilvray, M. “Tool for Rapid Transient Transpiration Cooled Re-Entry Simulation”, AIAA Journal (responded to review, 2019).
  • Hermann, T., McGilvray, M., Ifti, H. S., Hufgard, F., Löhle, S. “Thermal Impulse Response in Porous Media for Transpiration Cooling Systems”, Journal of Thermophysics and Heat Transfer (responded to review, 2019).
  • Hufgard, F., Loehle, S., Hermann, T., McGilvray, M., Schweikert, S., von Wolfersdorf, J.,
    Steelant, J., and Fasoulas, S. “Heat Flux Induced Transpiration Coolant Mass Flow Rate -Plenum Pressure Interaction”, Journal of Thermophysics and Heat Transfer (in preparation, 2019).
  • Vandeperre L.J., Rocher, M.E., Giovannini, T., Hedgecock, R., Hermann, T., Hufgard, F., Ifti, H. S., Löhle, S. and Mc Gilvray, M. “Oxidation protection of ultra-high temperature ceramics by transpiration cooling”. In preparation for Nature

2019

  • Atkins, C.W.C, Deiterding, R. “Simulations of flow in thermochemical nonequilibrium using adaptive mesh refinement.”, 7th European Conference on Computational Fluid Dynamics, Glasgow, UK, June 2018, 12 pages, 2019. (https://eprints.soton.ac.uk/420989)
  • Chakravarthy, K., Le Page, L., Hermann, T., and Williams, B.” Characterisation of Internal Heat Transfer Mechanisms in Transpiring Porous Media Using Optical Diagnostics”, International Conference on Flight Vehicles, Aerothermodynamics and Re-entry Missions & Engineering, Monopoli, Italy, 2019 (submitted).
  • Elmukashfi, E., Murray, A.V., Ireland, P.T. and Cocks, A.C.F., “Analysis of the Thermomechanical Stresses in Double-Wall Effusion Cooled Systems”, ASME Journal of Turbomachinery, 2019 (Under review)
  • Hermann, T., McGilvray, M., Saad Ifti, H., Hufgard, F. and Loehle, S., “Fluid-Solid Heat Exchange in Porous Media for Transpiration Cooling Systems,” AIAA Scitech Conference, 2019. DOI link for publication (opens in a new tab)
  • Hermann, T., Naved, I. and McGilvray, M., “Performance of Transpiration Cooled Heat Shields for Re-entry Vehicles” AIAA Scitech Conference, 2019.
  • Hermann, T., McGilvray, M., Hambidge, C., Doherty, L, Buttsworth, D.” Total Temperature Measurements in the Oxford High Density Tunnel”, International Conference on Flight Vehicles, Aerothermodynamics and Re-entry Missions & Engineering, Monopoli, Italy, 2019 (submitted).
  • Hermann, T., Naved, I., McGilvray, M. “Performance of Transpiration Cooled Heat Shields for Hypersonic Vehicles”, AIAA Science and Technology Forum and Exposition, San Diego, CA, 2019.
  • Hermann, T., McGilvray, M., Ifti, H. S., Hufgard, F., Löhle, S. “Fluid-Solid Heat Exchange in Porous Media for Transpiration Cooling Systems”, AIAA Science and Technology Forum and Exposition, San Diego, CA, 2019.
  • Hufgard, F., Loehle, S., von Wolfersdorf, J., Fasoulas, S., Rocher, M., Hermann, T., McGilvray, M., Steelant, J., “Surface Heat Flux Measurement in Transpiration Cooled Porous Materials using Plenum Pressure Data,” AIAA Scitech Conference, 2019. DOI link for publication (opens in a new tab)
  • Hufgard, F., Loehle, S., Fasoulas, S., Ewenz Rocher, M., Hermann, T., McGilvray, M., Steelant, J. “Surface Heat Flux Measurement in Transpiration Cooled Environment using Pressure Data”, International Conference on Flight Vehicles, Aerothermodynamics and Re-entry Missions & Engineering, Monopoli, Italy, 2019 (submitted).
  • Hufgard, F., Löhle, S., von Wolfersdorf, J., Fasoulas, S., Ewenz Rocher, M., Hermann, T., McGilvray, M., Steelant, J. ” Surface Heat Flux Measurement in Transpiration-Cooled Porous Materials using Plenum Pressure Data”, AIAA Science and Technology Forum and Exposition, San Diego, CA, 2019.
  • Ifti, H. S., Hermann, T. and McGilvray, M.” Transpiration Cooling at Mach 5 Employing Porous UHTC”, International Conference on Flight Vehicles, Aerothermodynamics and Re-entry Missions & Engineering, Monopoli, Italy, 2019 (submitted).
  • Jiang, Y., Murray, A. V., Ireland, P. T. and di Mare L., “Coolant Jets Interaction in Effusion Cooling System: Experimental and Numerical Study”, in ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, AZ, USA, 2019
  • Kerth, P., Hermann, T., and McGilvray, M.” Three Dimensional Focusing Schlieren Imaging using a Plenoptic Camera”, International Conference on Flight Vehicles, Aerothermodynamics and Re-entry Missions & Engineering, Monopoli, Italy, 2019 (submitted).
  • Murray, A.V., Ireland, P.T. and Romero E., “Development of a Steady-State Experimental Facility for the Analysis of Double-Wall Effusion Cooling Geometries”, J. Turbomach., vol 141, Issue 4, April 2019 DOI link for publication (opens in a new tab)
  • Murray, A.V., Ireland, P.T. and Romero E., “Experimental and Computational methods for the Evaluation of Double-Wall, Effusion Cooling Systems”, in ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, AZ, USA, 2019
  • Naved, I.,Le Page, L., Hermann, T., and McGilvray, M.” Numerical Simulation of Transpiration Cooling with a Two-Dimensional Substructure “, International Conference on Flight Vehicles, Aerothermodynamics and Re-entry Missions & Engineering, Monopoli, Italy, 2019 (submitted).
  • Ngetich, G. C. , Ireland, P. T. and Romero E., “Study of Film Cooling Effectiveness on a Double-Walled Effusion-Cooled Turbine Blade in a High-Speed Flow Using Pressure Sensitive Paint”, in ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, AZ, USA, 2019
  • Rife, M.E. and di Mare, L., “Numerical flux function for flow through porous media with discontinuous properties”, Journal of Computational Physics. 2019
  • Ewenz Rocher, M.., Hermann, T., McGilvray, M., Ifti, H. S., Hufgard, F., Eberhart, M., Meindl, A., Löhle, S., Zander, F. “Testing a Transpiration Cooled Zirconium-Di-Boride sample in the Plasma Tunnel at IRS”, AIAA Science and Technology Forum and Exposition, San Diego, CA, 2019.
  • Ewenz Rocher, M., Hermann, T., McGilvray, M., Ifti, H. S., Quinn, M. Studying the Film Effectiveness of Transpiration Cooled Walls using Pressure Sensitive Paint “, International Conference on Flight Vehicles, Aerothermodynamics and Re-entry Missions & Engineering, Monopoli, Italy, 2019 (submitted).
  • Rocher, M.E., Hermann, T., McGilvray, M., Saad Ifti, H., Hufgard, F., Eberhart, M., Meindl, Loehle, S., Giovannini and Vandeperre, L., “Testing a Transpiration Cooled Zirconium-Di-Boride sample in the Plasma Tunnel at IRS,” AIAA Scitech Conference, 2019. DOI link for publication (opens in a new tab)

2018

  • Cerminara, A., Deiterding, R., & Sandham, N., “DNS of Hypersonic Flow over Porous Surfaces with a Hybrid Method”, AIAA 2018-0600, AIAA Aerospace Sciences Meeting (SciTech Forum), January 2018, Kissimmee, FL DOI link for publication (opens in a new tab)
  • Cerminara, A., Deiterding, R., & Sandham, N., “Direct numerical simulation of hypersonic flow through regular and irregular porous surfaces”, 7th European Conference on Computational Fluid Dynamics, June 2018, Glasgow, UK (https://eprints.soton.ac.uk/420268/)
  • Cerminara, A., Deiterding, R. and Sandham, N. (2018) “Direct Numerical Simulation of Blowing in a Hypersonic Boundary Layer on a Flat Plate with Slots”, AIAA 2018-3713, AIAA Fluid Dynamics Conference (AVIATION Forum), June 2018, Atlanta, GA DOI link for publication (opens in a new tab)
  • Hermann, T., Ifti, H. S. , McGilvray, M., Doherty, L., Penty Geraets, R.” Mixing Characteristics in a Hypersonic Flow around a Transpiration Cooled Flat Plate Model”, International Conference on High-Speed Vehicle Science Technology, Moscow, Russia, 2018.
  • Hufgard, F., Loehle, S., Hermann, T., Schweikert, S., McGilvray, M., von Wolfersdorf, J., Steelant, J., and Fasoulas, S., “Analysis of Porous Materials for Transpiration Cooled Heat Flux Sensor Development,” HISST: International Conference on High-Speed Vehicle Science Technology, 2018.
  • Murray, A.V., Ireland, P.T., Wong, T.H., Tang, S.W. and Rawlinson A.J., “High Resolution Experimental and Computational Methods for Modelling Multiple Row Effusion Cooling Performance”, Int. J. Turbomach. Propuls. Power, vol. 3, no. 1, p. 4, Jan. 2018. DOI link for publication (opens in a new tab)
  • Ngetich, G.C. , Ireland, P.T., Murray, A.V. and Romero E., “A 3D Conjugate Approach for Analysing a Double-Walled Effusion-Cooled Turbine Blade”, J. Turbomach., Sep. 2018.DOI link for publication (opens in a new tab)

2017

  • Murray, A.V., Ireland, P.T. and Rawlinson, A.J., “An Integrated Conjugate Computational approach for Evaluating the Aerothermal and Thermomechanical Performance of Double-Wall Effusion Cooled Systems”,in ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Charlotte, NC, USA, 2017 DOI link for publication (opens in a new tab)